A little look into the creation of Sharkie

Sharkie was the first structured carved cake that I have ever made. I managed to take some “process shots”, this is not in depth but gives a rough idea of how I achieved Sharkie. I learnt a lot and now I think I’m addicted to 3D cakes. Thanks to my friends Nina and Karin for all you help!

DSC06935DSC06936DSC06938DSC06937

DSC06940 DSC06939      DSC06942DSC06953sharky_2_logo

Advertisements

How to make a gumpaste Macaron – tutorial

DSC06367 aDSC06371

 

 

DSC06599

Roll out some gumpaste approx 8mm thick

DSC06600

Cover with plastic wrap before cutting out the circle shapes, this gives a lovely smooth edge (I first saw this tip used by Lesley from the Royal Bakery https://www.facebook.com/theroyalbakery )

DSC06602

Cut two circles using the above method

DSC06603

There, you have two lovely little Mac shells…

DSC06604

Using your choice of tool, score a line in the middle of your mac shells as shown

DSC06605

Now to create the “feet” of your macs, I used this icing tip (sorry not sure of its name) but it has little sharp points perfect for making the marks I want

DSC06607

Make little marks the whole way around, now your little mac shell is starting to look pretty real. Do this to both shells.

DSC06609

Roll out some white gumpaste, using the same circle cutter cut out the Mac “filling”, don’t use the plastic wrap method for this as we want the edges to be sharp rather than smooth.

DSC06610

Choose some petal dust that is a shade darker than your gumpaste

DSC06612

Lightly dust the Mac “feet”

DSC06613

There we go, four cute little Macaron shells, patiently waiting for their filling… using a bit of edible glue, adhere two shells around the filling…note the filling may stick out a teeny bit from the shells, just use your fingers to shape the filling and the shells until they fit nice and flush, and now you have some sweet little Macs!

mac logo

Ahhh Bless!

How to create a simple pleated tier – Tutorial

pleat collage.jpg

A-Abstract

This is a short tutorial that gives some insight into how I make a simple pleated tier. By no means am I implying that this particular pleat design was created by me, I have seen it done many times but I have also been asked a lot of questions regarding how I achieved it, in particular the folding of the pleat underneath the cake. I hope the below helps you to achieve a pleat you are happy with.

DSC06109

This particular pleated design is for a tier that is going to have another tier above it. The design does not cover the entire top of the cake. Prior to making the pleats I score or mark the size of the above tier into the top of the cake. This is the guide for how far on top of the cake the pleats are to sit. This cake has been covered in a thin fondant base, this is absolutely not necessary, on all of my pleated cakes I do a very thing fondant base in the same colour, this gives a really tidy finish when the thin pleated effect is adhered, I also find the pleats stick to the fondant a lot easier. In addition to that, if you have any gaps in your pleats (which does not apply so much to this particular design, then they wont show due the base layer being the same colour)

DSC06112

The key to creating the pleats that fold under the cake is to elevate the cake on a very sturdy bowl. The cake remains there during the whole process and the pleats are adhered to the cake and folded under the cake base. It is important that once the pleats are completed to carefully place the cake onto a cake board (or if that is not ready yet just place it onto a flat surface that is lined with baking paper. This will ensure the pleats at the bottom dry in the perfect way rather than drying while the cake is elevated and then being placed onto a flat surface, this may cause the bottom pleats to crush or break. In addition, ensure pressure is applied when placing your completed cake onto a cake board or lower tier and use a level to make sure the cake is sitting flush, so that the pleats don’t cause the cake to be lop-sided.

DSC06113

Brush entire cake with edible glue, shortening or water. If it dries while your working you may need to reapply.

DSC06115

Also a few cm’s under the cake

DSC06182

Roll out a very thing piece of fondant. Measure the height of your cake and add a few cm’s to the length. Enough to fold over the top of the cake and enough for a wee bit to fold underneath.

DSC06197

Lay fondant over 3 paper straws (Dowels or skewers also work). Use your fingers to smooth over the straws and create grooves in between the straws.

DSC06199

Pinch the tops of the straws together at the top, this is creating the pleats.

DSC06200

Remove the straws, then gather the opposite ends together as pictured.

 

DSC06189

Using the guideline marked the top of the cake, adhere the first pleat to the top of the cake.

DSC06191

Trim the bottom of the pleat so it over hangs a little bit.

DSC06193

Fold the pleat under the cake and apply pressure to the cake base.

DSC06194

Every pleat will be different but it will now resemble something like this.

DSC06195

Apply a small amount of edible glue or water to the seam where the next pleat will overlap.

DSC06196

All of the following pleats are created in the same fashion as the first one. The only difference is that they a small “hem” is created on the edge that will over lap the prior pleat.

DSC06198

Turn the “hemmed” side over, lay over the straws and create the pleat.

DSC06204

Adhere the next pleat. See how I am applying pressure to the top of the pleat, almost squishing it down where it meets the guideline.

DSC06202

Do the same at the base of the cake.

DSC06206

Continue making pleats the whole way around the cake until it reaches the first pleat.

 

DSC06207

Wasn’t that easy??

A-Abstract

Wood Grain Cake Board Tutorial

A_bassinette_cake.jpg

This is a really quick tutorial showing how I made the wood grain effect on this cake board.

DSC05881

Colour enough fondant to cover your cake board. I wanted a light shade of wood so I used yellow with just little bit of brown. I also did not completey work all the colour through, only partially so there are natural “wood-like” streaks in the fondant.

DSC05885

Roll out fondant so its large enough to cover your cake board.

DSC05886

Cover cake board with the fondant (I used edible glue). Trim edges so they are lovely and tidy.

DSC05887

I have a wee wooden impression mat, I used it make random impressions all over the fondant. You may have a large one or if you don’t have one just use a Dresdon tool (or a knife or skewer) to make your own “wood-like” markings and impressions.

DSC05888

I put an emphasis around the edge of the board as the centre is going to be covered in cake.

DSC05890

Mark the wooden slots…or slats? …panels? you know what I mean, can you tell I have never drawn a straight line in my life! I guess you could use a ruler if you are really clever

DSC05891

I used the flat end of a wooden skewer to make the little nail holes

DSC05892

Mix brown gel colour with a wee bit of vodka to make a stain, using a pastry brush to paint the stain onto the fondant.

DSC05895

Paint long strokes, (I put paper towels underneath to save a bit of mess)

DSC05897

Using a bit of darker brown gel and a smaller brush, do some spot painting to create darker “woody” effects

DSC05898

See!

 

DSC05899

Taaa-daaa! A beautiful wood grain board, just let it dry then you can place your cake on it!

A_bassinette_cake.jpg

Bassinet Cake Tutorial

This was th second time I have made a Bassinet cake, I was really excited to try it again using more pleats and managed to take pics of the process to create this simple tutorial. I have also done a separate tutorial on how to make the Wood grain board. (Sorry pics were taken at night so not the best lighting!)

DSC05929

Start off by creating the Bassinet hood. This can be done a few ways, last time I made it out of gum paste, but this time I decided to make it out of solid chocolate, its stronger and yummier too! Using a bowl or a ball pan, coat a very thick layer of melted chocolate to half of the pan, place in fridge to set. Its important to take note of the size of the bowl or pan to ensure  the hood is going to sit within the size of your actual cake when its placed on top.  Make sure the centre line is very straight, this is the part that sits on the cake and you want it to be flush. I used a knife when it was semi-set.

DSC05932

Once its set, pop it out and you have a perfect little base for your Bassinet hood.

 

DSC05880

For the cake, I carved an 8 inch cake so that it measured approx 6 inches at the top. Then covered in ganache.

DSC05903

The cake was then covered in fondant. (This is a base to the fabric pleats so it does not need to be perfect)

DSC05904

A quilted pattern was then applied to the top of the cake. (This is going to look like a blanket that has been neatly tucked in)

DSC05922

Roll out a fat fondant “tube”, long enough to fit around the top of the cake (This is going to be covered in fabric pleats and will add height around the top of the bassinet)

DSC05935

Adhere the tube to the top of the cake. Using some left over melted chocolate adhere the bassinet hood o the top of the cake (within the tube)

DSC05943

Now to create some pleats. These will be added right around the entire top part of the cake. I scored a mark about 1.5 inches down the cake to use as a guideline for where these pleats would end. Then I rolled out some very thin fondant, approx inches 2 high and 3 inches wide. This will vary depending on your design and cake size.

DSC05945

lay fondant over 3 straws (or dowels), use your fingers to smooth grooves into the fondant.

DSC05946

Gather straws at the top to create pleats.

DSC05947

Remove straws and pinch fondant together.

DSC05948

Add a teeny bit of edible glue or water to the inside seam of the tube. I have already added the first pleat in this image.

DSC05949

Tuck pleat carefully into the inside of the tube, applying gentle pressure…

DSC05950

Pull pleat over tube and adhere the bottom of the pleat to the line that has been scored as a guideline.

DSC05954

The pleat should have a tidy finish on the inside.

DSC05956

The pleats should be starting to look like this, remember no two pleats will ever be the same, so don’t stress too much about them, once you stand back and look at them all together they will have a beautiful fabric effect. (Remember I had already added one pleat to this prior to the pic)

DSC05957

All of the following pleats must have a little “hem”, this part over laps the prior pleats and gives the effect of one continuous piece of fabric.

DSC05958

I added a dab of water in between each new pleat where the new one overlaps

DSC05961

Finish the pleats moving around the entire top of the cake.

DSC05963

Taa-daaa! Ok, so there’s a bit to go but you see where this is going now….

DSC05964

Now for the bottom fabric pleats, this part can be done is long sections. but its important to measure out the correct height.

DSC05966

Use a tooth pick (or your favourite tool for ruffles) to create a soft ruffled bottom

DSC05971

Start adding the pleats to the bottom section of the bassinet. I used my straws to create the pleats (as shown above)

DSC05974

Add pleats the whole way around. Take time to adjust the bottom to make sure its falls nicely.

DSC05978

Add Bassinet features, I added ribbon swags and a large bow. The swags hide where the pleats join.

DSC05980

I created the ribbon swags by cutting lengths of very thin fondant and then pinching the ends together to give an effect of being threaded into the fabric. You will see in the final pics I have also added little white strips of fondant where the ribbon swags join.

DSC05981

To create the bassinet hood pleats, I cut long strips of fondant, and used a tooth pic to soften and ruffle the edges, then I applied edible glue to the chocolate base and gently applied the first ruffle to the front of the bassinet, I wanted the pleat to over hang the chocolate base as shown.

DSC05982

Moving on to the bottom of the hood, start adding the remaining bassinet hood ruffles, they will face the opposite direction, so that they are hanging down (as shown)

DSC05984

Work all the way up to the top of the bassinet hood, ensuring each layer slightly over laps the prior layer and that the chocolate base is not exposed.

DSC05985

Give each end of the ruffles a small hem to ensure a tidy finish.

 

DSC05986

Taaa-daaaa!!

A_bassinette_cake.jpg

And the finished cake with my extra little touches (I added a pearl border inside the hood for a tidier finish). You can also see my little white strips I mentioned above that cover the blue ribbon joins, and of course my cute little elephant! The cake is sitting a wood grain board which I have also done a tutorial for.

DSC06004

 

Easy Fantasy Flower Tutorial

This is a really quick way of adding impact to your next cake design, a fun Fantasy Flower tutorial
aa flower close up

Roll out and cut 6 rose petals

Roll out and cut 6 rose petals

Create "veins"

Create “veins”

Use Ball tool to ruffle the edges

Use Ball tool to ruffle the edges

Cover a cup or small bowl with plastic wrap or foil. Using edible glue adhere the petals to each other, slightly overlapping.

Cover a cup or small bowl with plastic wrap or foil. Using edible glue adhere the petals to each other, slightly overlapping.

Tuck the last petal under the first one

Tuck the last petal under the first one

Dust the centre with petal dust

Dust the centre with petal dust

Create the flower "centre"

Create the flower “centre”

Using edible glue cover in teeny sugar pearls

Using edible glue cover in teeny sugar pearls

Glue th centre on and allow to dry over night, you can also place it directly onto your cake and support with paper towels or plastic wrap and let it dry. There you go! An Easy Peasy Flower! That looks gorgeous!

Glue the centre on and allow to dry over night, you can also place it directly onto your cake and support with paper towels or plastic wrap and let it dry. There you go! An Easy Peasy Flower! That looks gorgeous!

 

Taaaa-daaa!

Taaaa-daaa!

 

aa tiger cake logo